Cisco 10000-2P2-2DC Software Configuration Manual page 532

Configuring QoS Service Policies on GEC Interfaces
•
Create match-vlan class-maps as follows:
Step 3
Class-map match-any vlan_2
Class-map match-any vlan_3
Class-map match-any vlan_4
Class-map match-any vlan_2_4
Step 4 Create policy-maps as follows:
Policy-map mega_ingress
Policy-map mega_egress
Apply this policy on the GEC member links.
Step 5
Interface Gig3/0/0
Interface Gig4/0/0
Configuration Example for Applying QoS on GEC Bundle Subinterfaces
Example 23-1
Example 23-1 Applying QoS on GEC Bundle Subinterfaces
Class-map match-any dscp_20_30
Class-map match-any dscp_40
Policy-map police_dscp
Class dscp_20_30
Class dscp_40
Policy-map customer_A
Class class-default
Policy-map customer_B
Class class-default
Cisco 10000 Series Router Software Configuration Guide
23-6
Shape egress traffic for subinterfaces port-channel 1.1 and port-channel 1.3 together at 150 mbps
Match vlan 2
Match vlan 3
Match vlan 4
Match vlan 2 4
Class vlan_2
Police 100 mbps
Class vlan_3
Police 150 mbps
Class vlan_3
Shape 50 mpbs
Class vlan_2_4
Shape 150 mbps
Service-policy input mega_ingress
Service-policy output mega_egress
Service-policy input mega_ingress
Service-policy output mega_egress
shows how QoS is applied on GEC bundle subinterfaces:
Match dscp 20 30
Match dscp 40
Police 50 3000 3000 conform-action transmit exceed-action drop
Set ip dscp af22
Police 10 3000 3000 conform-action transmit exceed-action drop
Police 100 mpbs
service-policy police_dscp
Police 150 mbps
Chapter 23 Configuring Gigabit EtherChannel Features
OL-2226-23