Feature History For Static Mac Address For Pppoe - Cisco 10000-2P2-2DC Software Configuration Manual

Static MAC Address for PPPoE
Although the Static MAC Address for PPPoE feature is configurable for VPDN groups, we recommend
Note
that you configure this feature for BBA groups.
The configuration of the Static MAC Address for PPPoE feature for BBA groups and VPDN groups is
mutually exclusive. If you configure a MAC address as a source MAC address for a BBA group, a VPDN
group cannot use this MAC address as a source MAC address for the VPDN group. To apply the BBA
group MAC address to a VPDN group, you must manually configure the Static MAC Address for PPPoE
feature for the VPDN group as well.
Example 6-3
maximum of five sessions from each MAC address. If more than five sessions are attempted from this
MAC address, any sessions using that particular MAC address are throttled for 30 seconds.
Example 6-3
bba-group pppoe PPPoE
virtual-template 1
sessions per-vc limit 32000
sessions per-mac limit 32000
sessions per-mac throttle 5 1 30
To get a list of the throttled MAC addresses, use the show pppoe throttled mac command in privileged
EXEC mode:
Router# show pppoe throttled mac
MAC(s) throttled
00c1.00aa.006c
007c.009e.0070
0097.009d.007a
008c.0077.0082
00b5.00a8.009f
00a4.0088.00b5

Feature History for Static MAC Address for PPPoE

Cisco IOS Release
12.2(4)BZ1
12.3(7)XI1
12.2(28)SB
Cisco 10000 Series Router Software Configuration Guide
6-6
shows how you can throttle PPP sessions using the MAC address. This example allows a
Throttling PPP Sessions Using the MAC Address
MAC Ingress Port
ATM1/0/0.101
ATM1/0/0.101
ATM1/0/0.101
ATM1/0/0.101
ATM1/0/0.101
ATM1/0/0.101
Description
This feature was introduced on the Cisco 10000 series
router.
This feature was integrated into Cisco IOS Release
12.3(7)XI1.
This feature was integrated into Cisco IOS Release
12.2(28)SB.
Chapter 6 Configuring PPPoE over Ethernet and IEEE 802.1Q VLAN
Required PRE
PRE1
PRE2
PRE2
OL-2226-23