Cisco 10000-2P2-2DC Software Configuration Manual page 85

10000 series
Table of Contents

Advertisement

Configuring Remote Access to MPLS VPN
TheCisco 10000 series router supports the IP virtual private network (VPN) feature for Multiprotocol
Label Switching (MPLS). MPLS-based VPNs allow service providers to deploy a scalable and
cost-effective VPN service that provides a stable and secure path through the network. An enterprise or
Internet service provider (ISP) can connect to geographically dispersed sites through the service
provider's network. Using the MPLS backbone, a set of sites are interconnected to create an MPLS VPN.
The remote access (RA) to MPLS VPN feature on the Cisco 10000 series router allows the service
provider to offer a scalable end-to-end VPN service to remote users. The RA to MPLS VPN feature
integrates the MPLS-enabled backbone with broadband access capabilities. By integrating access VPNs
with MPLS VPNs, a service provider can:
Enable remote users and offices to seamlessly access their corporate networks
Offer equal access to a set of different ISPs or retail service providers
Integrate their broadband access networks with the MPLS-enabled backbone
Provide an end-to-end VPN service to enterprise customers with remote access users and offices
Separate network access and connectivity functions from ISP functions
The RA to MPLS VPN feature is described in the following topics:
Verifying VPN Operation, page 3-30
Configuration Examples for RA to MPLS VPN, page 3-30
Monitoring and Maintaining an MPLS Configuration, page 3-39
Monitoring and Maintaining the MPLS VPN, page 3-43
Monitoring and Maintaining PPPoX to MPLS VPN, page 3-47
Monitoring and Maintaining RBE to MPLS VPN, page 3-48
OL-2226-23
C H A P T E R
Cisco 10000 Series Router Software Configuration Guide
3
3-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

1000510008

Table of Contents