Cisco 10000-2P2-2DC Software Configuration Manual page 154

Session Limit Per VRF
exit
session-limit 5
vpdn-group group3
accept-dialin
protocol any
exit
no source vpdn-template
Example 4-6
groupC. As indicated in the default VPDN template configuration, the maximum combined number of
sessions allowed for all VPDN groups associated with the default template is 10 sessions. The local name
of the default VPDN template is local-name.
named templateA, which has a session limit of 50. The combined number of sessions for all VPDN
groups associated with templateA cannot exceed 50 concurrent sessions, regardless of the session limits
set for the individual VPDN groups. VPDN groupA and groupB are attached to VPDN templateA and
each group has an individual session limit of 30 sessions. Because groupA and groupB are attached to
VPDN templateA, they use the hostname host1 as their local name.
In Example
specific VPDN template. Therefore, by default, VPDN groupC is attached to the default VPDN template,
which has a group session limit of 10. VPDN groupC inherits the local name local-name from the default
VPDN template.
Example 4-6
hostname host1
vpdn-template
group session-limit 10
local name local-name
exit
vpdn-template templateA
group session-limit 50
exit
vpdn-group groupA
accept-dialin
protocol any
exit
source vpdn-template templateA
session-limit 30
exit
vpdn-group groupB
accept-dialin
protocol any
exit
source vpdn-template templateA
session-limit 30
exit
vpdn-group groupC
accept-dialin
protocol any
Cisco 10000 Series Router Software Configuration Guide
4-20
creates a default VPDN template and three VPDN groups named groupA, groupB, and
4-6, the source vpdn-template command is not used to associate VPDN groupC with a
Configuring Session Limit Per VRF
Chapter 4 Configuring Multiprotocol Label Switching
Example 4-6 also creates an additional VPDN template
OL-2226-23