Pppoe Over Ieee 802.1Q Vlans; Feature History For Pppoe Over Ieee 802.1Q Vlans; Restrictions For Pppoe Over Ieee 802.1Q Vlans; Configuration Tasks For Pppoe Over Ieee 802.1Q Vlans - Cisco 10000-2P2-2DC Software Configuration Manual

10000 series
Table of Contents

Advertisement

Chapter 6
Configuring PPPoE over Ethernet and IEEE 802.1Q VLAN

PPPoE over IEEE 802.1Q VLANs

The PPPoE over IEEE 802.1Q VLANs feature enables the Cisco 10000 series router to support PPPoE
over IEEE 802.1Q encapsulated VLAN interfaces. IEEE 802.1Q encapsulation is used to interconnect a
VLAN-capable router with another VLAN-capable networking device. The packets on the 802.1Q link
contain a standard Ethernet frame and the VLAN information associated with that frame.
Note
PPPoE is disabled by default on a VLAN.
The PPPoE over IEEE 802.1Q VLANs feature is described in the following topics:

Feature History for PPPoE over IEEE 802.1Q VLANs

Cisco IOS Release
12.2(4)BZ1
12.3(7)XI1
12.2(28)SB

Restrictions for PPPoE over IEEE 802.1Q VLANs

The PPPoE over IEEE 802.1Q VLANs feature has the following restrictions:

Configuration Tasks for PPPoE over IEEE 802.1Q VLANs

To configure the PPPoE over IEEE 802.1Q VLANs feature, perform the following configuration tasks:
OL-2226-23
Feature History for PPPoE over IEEE 802.1Q VLANs, page 6-7
Restrictions for PPPoE over IEEE 802.1Q VLANs, page 6-7
Configuration Tasks for PPPoE over IEEE 802.1Q VLANs, page 6-7
Configuration Examples for PPPoE over IEEE 802.1Q VLANs, page 6-10
Verifying PPPoE over Ethernet and IEEE 802.1Q VLAN, page 6-11
Clearing PPPoE Sessions, page 6-12
Description
This feature was introduced on the Cisco 10000 series
router.
This feature was integrated into Cisco IOS Release
12.3(7)XI1.
This feature was integrated into Cisco IOS Release
12.2(28)SB.
The Cisco 10000 series router currently supports the PPPoE over IEEE 802.1Q VLANs feature on
Gigabit Ethernet line cards and Fast Ethernet 8-port half-height line cards. The Fast Ethernet port
of the performance routing engine (PRE) does not support this feature.
The Cisco 10000 series router supports this feature for PPPoE dialin only. PPPoE dialout (client) is
not supported.
Configuring a Virtual Template Interface, page 6-8
Creating an Ethernet 802.1Q Encapsulated Subinterface and Enabling PPPoE, page 6-8
Cisco 10000 Series Router Software Configuration Guide
PPPoE over IEEE 802.1Q VLANs
Required PRE
PRE1
PRE2
PRE2
6-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

1000510008

Table of Contents