Monitoring And Maintaining Atm Pvc Autoprovisioning - Cisco 10000-2P2-2DC Software Configuration Manual

ATM PVC Autoprovisioning

Monitoring and Maintaining ATM PVC Autoprovisioning

To monitor and maintain the ATM PVC autoprovisioning feature, enter any of the following commands
in privileged EXEC mode.
Command
Router# show atm pvc
Router# show atm vc
Router# show atm pvc VPI/VCI
Router# debug atm autovc {event | error | all]
Because debugging output is assigned high priority in the CPU process, it can render the system
Caution
unusable. For this reason, use debug commands only to troubleshoot specific problems or during
troubleshooting sessions with Cisco Systems technical support personnel. Moreover, it is best to use
debug commands during periods of lower network traffic and fewer users. Debugging during these
periods decreases the likelihood that increased debug command processing overhead will affect system
use.
Example 8-9
Example 8-9
Router# show atm pvc
VCD /
Interface Name
5/0.111
5/0.111
5/0.111
Cisco 10000 Series Router Software Configuration Guide
8-12
Purpose
Displays information about ATM PVCs, such as the interface,
VPI/VCI, type, and encapsulation. PVC-A (PVC-Automatic)
listed in the Type field indicates that the PVC is an on-demand
PVC.
Displays information about ATM VCs, including if the VC is an
on-demand VC as indicated by VC-A (VC-Automatic) in the
Type field.
Displays information about a specific PVC, including if VC
autoprovisioning is enabled.
Displays on-demand VC events and errors.
Use the event option to display all on-demand VC events.
Use the error option to display all on-demand VC errors.
Use the all option to display both on-demand VC events and
errors.
Note
indicates that autoprovisioning is enabled on PVCs 0/50, 0/51, and 0/52.
show atm pvc Command
VPI VCI Type Encaps
7 0 50 PVC-A SNAP
8 0 51 PVC-A SNAP
9 0 52 PVC-A SNAP
Chapter 8 Configuring ATM Permanent Virtual Circuit Autoprovisioning
Using the debug atm autovc command for a large range
of PVCs can result in a large display of messages to the
console window.
Peak Avg/Min Burst
SC Kbps Kbps Cells
UBR 149760
UBR 149760
UBR 149760
Sts
UP
UP
UP
OL-2226-23