Verifying Extended Nas-Port-Type And Nas-Port-Id Attributes Support - Cisco 10000-2P2-2DC Software Configuration Manual

Chapter 16 Configuring RADIUS Features
You can override the NAS-Port-Type configured globally on the router at an interface or subinterface
level. To override all global options on how the Extended NAS-Port-Type attribute is sent on any interfaces
or subinterfaces such as for Ethernet, VLAN, Q-in-Q, VC, or VC ranges, enter the following commands
in the PVC submode or Ethernet subinterface mode (beginning in global configuration mode):
Command
Step 1
Router(config)# interface atm 5/0/0.1
Step 2
Router(config-subif)# pvc 1/33
Step 3
Router(config-if-atm-vc)# radius
attribute nas-port-type [value]

Verifying Extended NAS-Port-Type and NAS-Port-ID Attributes Support

To verify the Extended NAS-Port-Type and NAS-Port-ID Attributes Support feature, enter the following
command in privileged EXEC mode:
Command
Router# show running-config
The following example displays the current configuration of RADIUS command output, where you have
enabled the extended NAS-Port-Types. You can use delimiting characters to display only the relevant
parts of the configuration.
Router# show run | inc radius
aaa authentication ppp default group radius
aaa authorization network default group radius
aaa accounting network default start-stop group radius
radius-server attribute 61 extended
radius-server attribute nas-port format e SSSSAPPPUUUUUUUUUUUUUUUUUUUUUUUU
OL-2226-23
Extended NAS-Port-Type and NAS-Port Support
Purpose
Enters ATM subinterface mode.
Enters PVC subinterface mode.
To set a different extended NAS-Port-Type value for an interface
or subinterface, select a value for a port type to override the
NAS-Port type configured globally. This feature allows for
further differentiation of different customer usage.
Select a value for NAS-Port-Type. Value can be any number,
0-2147483647, chosen by the customer. In particular,
customizing your own value is useful when you need to
differentiate the NAS-Port-Type based on which type of end
client is actually using the port. For example if you want to track
mobile clients behind a specific PVC, you can define your own
NAS-Port-Type for mobile clients.
You must choose a number within the range 1-40 for
Note
value if you wish to set a different customized extended
NAS-Port-Type value and do that in conjunction with
configuring an extended specific service port type (using
the "format e type" command). Choosing a number
outside that range will cause the default NAS-port format
e string to be used to configure the NAS-Port value that is
sent for that session.
Purpose
Displays the current configuration of the router. Check the output
of this command to confirm the configuration.
Cisco 10000 Series Router Software Configuration Guide
16-49