Status Messages Screen - Cisco 7970G - IP Phone VoIP Administration Manual

Status Menu

Status Messages Screen

Step 1
Step 2
Step 3
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
7-4
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
To display the Status menu, press the Settings button and then select Status.
To exit the Status menu, press the Exit softkey.
The Status Messages screen displays the 10 most recent status messages that the
phone has generated. You can access this screen at any time, even if the phone has
not finished starting up.
display. This table also includes actions you can take to address errors.
To display the Status Messages screen, follow these steps:
Procedure
Press the Settings button.
Select Status.
Select Status Messages.
To remove current status messages, press the Clear softkey.
To exit the Status Messages screen, press the Exit softkey.
Table 7-2 describes the status messages that might
OL-14626-01