Cisco 7970G - IP Phone VoIP Administration Manual page 124

Device Configuration Menu
Table 4-12 Media Configuration Menu Options (continued)
Option
Recording Tone
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
4-32
Description
Indicates whether a recording tone
(often referred to as a beep tone) is
enabled or disabled for the phone. If the
recording tone option is enabled, the
phone plays the beep tone in both
directions of every call, regardless of
whether the call actually gets recorded.
The beep tone first sounds when a call
is answered.
You may want to notify your users if
you enable this option.
Default: Disabled
Related Parameters:
Recording Tone Local Volume
•
Recording Tone Remote Volume
•
Recording Tone Duration
•
Other related parameters—Beep tone
frequency in hz, the length of the beep
tone (called duration), and how often
the beep tone plays (called
interval)—are defined on a
per-Network Locale basis in the xml
file that defines tones. This xml file is
usually named tones.xml or
g3-tones.xml.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
OL-14626-01