Adjusting The Placement Of The Cisco Unified Ip Phone; Adjusting Cisco Unified Ip Phone Footstand And Phone Height; Securing The Phone With A Cable Lock - Cisco 7970G - IP Phone VoIP Administration Manual

Adjusting the Placement of the Cisco Unified IP Phone

Adjusting the Placement of the Cisco Unified IP
Phone

Adjusting Cisco Unified IP Phone Footstand and Phone Height

Step 1
Step 2

Securing the Phone with a Cable Lock

Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
3-12
Related Topics
Before You Begin, page 3-2
•
Adjusting the Placement of the Cisco Unified IP Phone, page 3-12
•
Configuring Startup Network Settings, page 3-17
•
The Cisco Unified IP Phone includes an adjustable footstand. When placing the
phone on a desktop surface, you can adjust the tilt height to several different
angles in 7.5 degree increments from flat to 60 degrees. You can also mount the
phone to the wall by using the footstand or by using the optional locking wall
mount kit.
You can adjust the footstand adjustment plate on the Cisco Unified IP Phone to
the height that provides optimum viewing of the phone screen. See
more information.
Procedure
Push in the footstand adjustment button.
Adjust the footstand to the desired height.
You can secure the Cisco Unified IP Phone 7970G and 7971G-GE to a desktop
by using a laptop cable lock. The lock connects to the security slot on the back of
the phone, and the cable can be secured to a desktop.
Chapter 3 Setting Up the Cisco Unified IP Phone
Figure 3-4 for
OL-14626-01