Status Messages Screen - Cisco IP Phone Administration Manual

Chapter 8 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phones

Status Messages Screen

The Status Messages screen displays the 10 most recent status messages that the phone has generated.
You can access this screen at any time, even if the phone has not finished starting up.
the status messages that might appear. This table also includes actions you can take to address errors.
To display the Status Messages screen, follow these steps:
Procedure
Press the Settings button
Step 1
Select Status
Step 2
Select Status Messages
Step 3
Step 4 To remove current status messages, press the Clear softkey.
To exit the Status Messages screen, press the Exit softkey.
Step 5
Table 8-2 Status Messages on the Cisco Unified IP Phone
Message
BootP server used
CFG file not found
CFG TFTP Size Error
OL-23091-01
Description
The phone obtained its IP address from a
BootP server rather than a DHCP server.
The name-based and default
configuration file was not found on the
TFTP Server.
The configuration file is too large for file
system on the phone.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Possible Explanation and Action
None. This message is informational only.
The Cisco Unified Communications Manager creates
a configuration file for the phone with the phone is
added to the database. If the phone has not been added
to the Cisco Unified Communications Manager
database, the TFTP server generates a
response.
Found
Phone is not registered with Cisco Unified
•
Communications Manager.
You must manually add the phone to Cisco
Unified Communications Manager if you are not
allowing phones to auto-register. See
Phones with Cisco Unified Communications
Manager Administration, page 2-11
If you are using DHCP, verify that the DHCP
•
server is pointing to the correct TFTP server.
• If you are using static IP addresses, check
configuration of the TFTP server. See
Configuration Menu, page 4-5
assigning a TFTP server.
Power cycle the phone.
Status Menu
Table 8-2 describes
CFG File Not
Adding
for details.
Network
for details on
8-3