Cisco 7970G - IP Phone VoIP Administration Manual page 80

Installing the Cisco Unified IP Phone
Procedure
Connect the handset to the
1.
Handset port.
Connect a headset to the
2.
Headset port.
Connect the power supply to
3.
the Cisco DC Adapter port.
4. Connect a Category 3 or 5
straight-through Ethernet
cable from the switch to the
10/100 SW port (Cisco
Unified IP Phone 7970) or
the 10/100/1000 SW port
(Cisco Unified IP Phone
7971G-GE).
Connect a Category 3 or 5
5.
straight-through Ethernet
cable from another network
device, such as a desktop
computer, to the 10/100 PC
port (Cisco Unified
IP Phone 7970) or the
10/100/1000 PC port (Cisco
Unified IP Phone
7971G-GE).
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
3-8
Notes
—
Optional. You can add a headset
later if you do not connect one
now.
Optional.
Each Cisco Unified IP Phone
ships with one Ethernet cable in
the box.
Optional. You can connect
another network device later if
you do not connect one now.
Chapter 3 Setting Up the Cisco Unified IP Phone
Reference
—
See the "Headset" section on
page 3-5 for supported headsets.
See the "Providing Power to the
Phone" section on page
See the "Network and Access
Ports" section on page 3-3
guidelines.
See the "Network and Access
Ports" section on page 3-3
guidelines.
2-4.
for
for
OL-14626-01