Firmware Versions Screen - Cisco 7970G - IP Phone VoIP Administration Manual

Status Menu

Firmware Versions Screen

Step 1
Step 2
Step 3
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
7-16
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
The Firmware Versions screen displays information about the firmware version
that is running on the phone.
on this screen.
To display the Firmware Version screen, follow these steps:
Procedure
Press the Settings button.
Select Status.
Select Firmware Versions.
To exit the Firmware Version screen, press the Exit softkey.
Table 7-4 Firmware Version Information
Item
Load File
App Load ID
JVM Load ID
OS Load ID
Boot Load ID
DSP Load ID
Expansion Module 1
Expansion Module 2
Table 7-4 explains the information that is displayed
Description
Load file running on the phone
Identifies the JAR file running on the phone
Identifies the Java Virtual Machine (JVM) running
on the phone
Identifies the operating system running on the phone
Identifies the factory-installed load running on the
phone
Identifies the digital signal processor (DSP) software
version used
Identifies the load running on the Expansion
Module(s), if connected to and SCCP phone
OL-14626-01