Chapter 2
Preparing to Install the Cisco Unified IP Phone on Your Network
Adding Phones with BAT
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
Adding Phones to the Cisco Unified Communications Manager Database
For complete instructions and conceptual information about Cisco Unified
Communications Manager, refer to Cisco Unified Communications Manager
Administration Guide and to Cisco Unified Communications Manager System
Guide.
Related Topics
Adding Phones with Auto-Registration, page 2-14
•
Adding Phones with Auto-Registration and TAPS, page 2-15
•
Adding Phones with BAT, page 2-17
•
Cisco Unified Communications Manager Bulk Administration Tool (BAT), a
standard Cisco Unified Communications Manager application, enables you to
perform batch operations, which includes registration, on multiple phones.
To add phones using BAT only (not in conjunction with TAPS), you first need to
obtain the appropriate MAC address for each phone.
For information about determining a MAC address, see the
MAC Address of a Cisco Unified IP Phone" section on page
For detailed instructions about using BAT, refer to Cisco Unified
Communications Manager Bulk Administration Guide.
Related Topics
•
Adding Phones with Auto-Registration, page 2-14
Adding Phones with Auto-Registration and TAPS, page 2-15
•
Adding Phones with Cisco Unified Communications Manager
•
Administration, page 2-16
"Determining the
2-20.
2-17