Where To Go For More Troubleshooting Information; Cleaning The Cisco Unified Ip Phone - Cisco 7970G - IP Phone VoIP Administration Manual

Where to Go for More Troubleshooting Information

Where to Go for More Troubleshooting Information

Cleaning the Cisco Unified IP Phone

Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
9-26
If you have additional questions about troubleshooting the Cisco Unified IP
Phones, several Cisco.com web sites can provide you with more tips. Choose from
the sites available for your access level.
Cisco Unified IP Phone Troubleshooting Resources:
•
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_
support_series_home.html
Cisco Products and Services (Technical Support and Documentation):
•
http://www.cisco.com/en/US/products/sw/voicesw/tsd_products_support_
category_home.html
To clean your Cisco Unified IP phone, use a soft, dry cloth to wipe the phone and
the touchscreen. Do not apply liquids or powders directly on the phone. As with
all non-weather-proof electronics, liquids and powders can damage the
components and cause failures.
Disable the touchscreen before cleaning it so that you will not inadvertently
choose a feature from the pressure of the cleaning cloth. To disable the
touchscreen so that it will not respond to touch, press the Display button for more
than one second. The phone displays Touchscreen Disabled and the Display
button flashes green.
After one minute, the touchscreen automatically re-enables itself. To re-enable the
touchscreen before that, press the flashing Display button for more than one
second. The phone displays Touchscreen Enabled.
Chapter 9 Troubleshooting and Maintenance
OL-14626-01