View Status Messages Screen - Cisco 7925G Administration Manual

View Status Messages Screen

Trace Settings
Related Topics
Perform Site Survey, on page 46
Display Neighbor List, on page 45
Firmware Versions, on page 193
Call Statistics, on page 191
View Network Statistics, on page 189
View Status Messages Screen, on page 186
View Status Messages Screen
You can use the Settings menu and Status menu to view status messages for the Cisco Unified Wireless IP
Phone. The Status Messages screen displays up to 10 of the most recent status messages that the phone has
generated.
You can access this screen at any time, even if the phone has not finished starting up.
Fields, on page 189
take to address indicated errors.
To view status messages, follow these steps:
Procedure
Step 1
Choose Settings > Status.
Step 2 Select Status Messages. The list of the status messages displays.
Step 3 To erase the messages, press Clear.
Step 4 To exit the screen, press Back.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
186
Displays the debug information for the phone. The following debug options are enabled from this
screen:
• Remote syslog
• Trace levels
• Preserve logs
• Preserve trace levels
describes the status messages that might appear. This table also includes actions you can
Security, Device, Model, Status, and Call Statistics Information
Network Statistics