Displaying A Configuration Menu; Unlocking And Locking Options - Cisco 7970G - IP Phone VoIP Administration Manual

Configuration Menus on the Cisco Unified IP Phone 7970 Series

Unlocking and Locking Options

Note
Caution
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
4-4
Network Configuration Menu, page 4-7
•
Device Configuration Menu, page 4-16
•
Security Configuration Menu, page 4-46
•
Configuration options that can be changed from a phone are locked by default to
prevent users from making changes that could affect the operation of a phone.
You must unlock these options before you can change them.
When options are inaccessible for modification, a locked padlock icon
appears on the configuration menus. When options are unlocked and accessible
for modification, an unlocked padlock
To unlock or lock options, press **#. This action either locks or unlocks the
options, depending on the previous state.
If a Settings Menu password has been provisioned, SIP phones present an "Enter
password" prompt after you enter **#.
Make sure to lock options after you have made your changes.
Do not press **# to unlock options and then immediately press **# again to lock
options. The phone will interpret this sequence as **#**, which will reset the
phone. To lock options after unlocking them, wait at least 10 seconds before you
press **# again.
Related Topics
Displaying a Configuration Menu, page 4-3
•
Editing Values, page 4-5
•
Overview of Options Configurable from a Phone, page 4-6
•
Network Configuration Menu, page 4-7
•
Device Configuration Menu, page 4-16
•
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
icon appears on these menus.
OL-14626-01