Cisco 7970G - IP Phone VoIP Administration Manual page 167

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Services URL
button
Shared line
Silent Monitoring
Single Button Barge
(SCCP phones
only)
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
Description
Allows users to access services from a
programmable button rather than by
using the Services menu on a phone.
Allows a user to have several phones that
share the same phone number or allows a
user to share a phone number with a
coworker.
Allows a supervisor to silently monitor an
active call. The supervisor cannot be
heard by either party on the call. The user
might hear an intermittent tone
(beep tone) during a call when it is being
monitored.
Note The intercom feature is disabled
when a call is being monitored or
recorded.
Allows users to press a line key to Barge
or cBarge into a remote-in-use call on a
shared line.
Telephony Features Available for the Phone
Configuration Reference
For more information refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Cisco Unified IP Phone
Configuration" chapter.
Cisco Unified Communications
•
Manager System Guide, "Cisco
Unified IP Phone Services"
chapter.
For more information refer to Cisco
Unified Communications Manager
System Guide, "Cisco Unified IP
Phones" chapter.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, "Monitoring and Recording"
chapter.
For more information, refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Device Pool Configuration"
chapter.
Cisco Unified Communications
•
Manager System Guide, "Cisco
Unified IP Phones" chapter.
Cisco Unified Communications
•
Manager Features and Services
Guide, "Barge and Privacy"
chapter.
5-21