Overview Of Supported Security Features - Cisco 7970G - IP Phone VoIP Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone

Overview of Supported Security Features

Note
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
Table 1-2 Cisco Unified IP Phone and Cisco Unified Communications
Manager Security Topics (continued)
Topic
Resetting or restoring the phone
802.1X Authentication for Cisco
Unified IP Phones
Table 1-3 provides an overview of the security features that the
Cisco Unified IP Phone 7970 Series supports. For more information about these
features and about Cisco Unified Communications Manager and
Cisco Unified IP Phone security, refer to Cisco Unified Communications
Manager Security Guide.
For information about current security settings on a phone, look at the Security
Configuration menus on the phone (choose Settings > Security Configuration
and choose Settings > Device Configuration > Security Configuration). For
more information, see
Unified IP Phone."
Most security features are available only if a certificate trust list (CTL) is installed
on the phone. For more information about the CTL, refer to "Configuring the
Cisco CTL Client" chapter in the Cisco Unified Communications Manager
Security Guide.
Understanding Security Features for Cisco Unified IP Phones
Reference
See the
Cisco Unified IP Phone" section on
page 9-19
See these sections:
•
•
•
Chapter 4, "Configuring Settings on the Cisco
"Resetting or Restoring the
"Supporting 802.1X
Authentication on Cisco Unified
IP Phones" section on page 1-22
"802.1X Authentication and
Status" section on page 4-51
"Troubleshooting Cisco Unified
IP Phone Security" section on
page 9-12
1-15