Device Configuration Menu
Table 4-17
Network Configuration Menu Options
Option
Load Server
RTP Control
Protocol
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
4-42
Description
Used to optimize installation time for phone
firmware upgrades and offload the WAN by
storing images locally, negating the need to
traverse the WAN link for each phone's upgrade.
You can set the Load Server to another TFTP
server IP address or name (other than the TFTP
Server 1 or TFTP Server 2) from which the phone
firmware can be retrieved for phone upgrades.
When the Load Server option is set, the phone
contacts the designated server for the firmware
upgrade.
The Load Server option allows you to
Note
specify an alternate TFTP server for phone
upgrades only. The phone continues to use
TFTP Server 1 or TFTP Server 2 to obtain
configuration files. The Load Server
option does not provide management of
the process and of the files, such as file
transfer, compression, or deletion.
Indicates whether the phone supports the
Real-Time Control Protocol (RTCP). Settings
include:
Enabled
•
Disabled—default
•
If this feature is disabled, several call statistic
values display as 0. For additional information,
see the following sections:
Call Statistics Screen, page 7-18
•
Streaming Statistics, page 8-15
•
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified
Communications Manager
Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified
Communications Manager
Administration, choose
Device > Phone > Phone
Configuration.
OL-14626-01