Cisco 7970G - IP Phone VoIP Administration Manual page 48

Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-6 Checklist for Configuring the Cisco Unified IP Phones 7970 Series in Cisco Unified
Communications Manager (continued)
Configuration Step and Purpose
Step 7 Configure Cisco Unified IP Phone services and assign
services (optional).
Provides IP Phone services.
Users can add or change services on their
Note
phones by using the Cisco Unified CM User
Options.
Step 8 Assign services to phone buttons (optional).
Provides single button access to an IP phone service or
URL.
Step 9
Add user information by configuring required fields.
Required fields are indicated by an asterisk (*); for
example, User ID and last name.
Assign a password (for User Options web pages)
Note
and PIN (for Extension Mobility and Personal
Directory)
Adds user information to the global directory for Cisco
Unified Communications Manager.
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
1-30
Chapter 1 An Overview of the Cisco Unified IP Phone
For More Information
Refer to Cisco Unified
Communications Manager
Administration Guide, "Cisco
Unified IP Phone Services
Configuration" chapter.
See the "Setting Up Services"
section on page
Refer to Cisco Unified
Communications Manager
Administration Guide, "Cisco
Unified IP Phone Configuration"
chapter, "Adding a Cisco
Unified IP Phone Service to a Phone
Button" section.
Refer to Cisco Unified
Communications Manager
Administration Guide, "End User
Configuration" chapter.
See the "Adding Users to Cisco
Unified Communications Manager"
section on page
5-27.
5-27.
OL-14626-01