Cisco 7970G - IP Phone VoIP Administration Manual page 83

For cisco unified communications manager 6.1 (sccp and sip)
Hide thumbs Also See for 7970G - IP Phone VoIP:
Table of Contents

Advertisement

Chapter 3
Setting Up the Cisco Unified IP Phone
The Find and List Phone window displays. You can search for one or more phones
that you want to configure for the Cisco Unified IP Phone Expansion Module
7914.
Select and enter your search criteria and click Find.
Step 3
The Find and List Phone window redisplays and shows a list of the phones that
match your search criteria.
Click the IP Phone that you want to configure for the Cisco Unified IP Phone
Step 4
Expansion Module 7914.
The Phone configuration window displays.
Scroll to the Phone Button and Expansion Module Template Information section.
Step 5
Add support for expansion modules:
Step 6
In the Firmware Load Information section, there are two fields for specifying the
firmware load for Modules 1 and 2. You can leave these fields blank to use the
default firmware load.
Step 7
Scroll to the top of the page and click Update.
A message displays asking you to reset the phone for the changes to take effect.
Click OK.
Click Reset Phone for the changes to take effect.
Step 8
Refer users to their Cisco Unified CM User Options so they can configure buttons
Note
and program buttons to access phone services on the Cisco Unified IP Phone
Expansion Module 7914. See the
Configure Phone Features" section on page A-4
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP Phones Only)
To add one expansion module, in the Module 1 field, choose 7914 14-Button
Line Expansion Module.
To add a second expansion module, in the Module 2 field, choose
7914 14-Button Line Expansion Module.
"How Users Subscribe to Services and
for more details.
3-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

7971g-ge7970g-ge

Table of Contents