Cisco 7970G - IP Phone VoIP Administration Manual page 107

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option
PC Port
Configuration
PC VLAN
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
Description
Speed and duplex of the access port (labeled
10/100 PC on the Cisco Unified IP Phone 7970,
and 10/100/1000 PC on the Cisco
Unified IP Phone 7971G-GE). Valid values:
Auto Negotiate
•
10 Half—10-BaseT/half duplex
•
10 Full—10-BaseT/full duplex
•
100 Half—100-BaseT/half duplex
•
100 Full—100-BaseT/full duplex
•
1000 Full—1000-BaseT/full duplex
•
If the phone is connected to a switch, configure the
port on the switch to the same speed/duplex as the
phone, or configure both to auto-negotiate.
If you change the setting of this option, you must
change the SW Port Configuration option to the
same setting.
Allows the phone to interoperate with 3rd party
switches that do not support a voice VLAN. The
Admin VLAN ID option must be set before you
can change this option.
Related Topics
Displaying a Configuration Menu, page 4-3
•
Unlocking and Locking Options, page 4-4
•
Network Configuration Menu
To Change
Unlock network
1.
configuration options.
Scroll to the PC Port
2.
Configuration option
and then press the Edit
softkey.
Scroll to the setting that
3.
you want and then press
the Select softkey.
Press the Save softkey.
4.
Unlock network
1.
configuration options.
Make sure the Admin
2.
VLAN ID option is set.
Scroll to the PC VLAN
3.
option, press the Edit
softkey, and then enter a
new PC VLAN setting.
Press the Validate
4.
softkey and then press
the Save softkey.
4-15