Network Configuration - Cisco 7970G - IP Phone VoIP Administration Manual

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Table 8-2
Item
Operational VLAN ID Auxiliary Virtual Local Area Network (VLAN)
Admin. VLAN ID
Communications
Manager 1–5
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
Network Configuration Area Items (continued)
Description
configured on a Cisco Catalyst switch in which the
phone is a member.
Auxiliary VLAN in which the phone is a member.
Host names or IP addresses, in prioritized order, of the
Cisco Unified Communications Manager servers with
which the phone can register. An item can also show
the IP address of an SRST router that is capable of
providing limited Cisco Unified Communications
Manager functionality, if such a router is available.
For an available server, an item will show the
Cisco Unified Communications Manager server IP
address and one of the following states:
Active—Cisco Unified Communications
•
Manager server from which the phone is currently
receiving call-processing services.
Standby—Cisco Unified Communications
•
Manager server to which the phone switches if the
current server becomes unavailable.
Blank—No current connection to this
•
Cisco Unified Communications Manager server.
An item may also include the Survivable Remote Site
Telephony (SRST) designation, which identifies an
SRST router capable of providing
Cisco Unified Communications Manager functionality
with a limited feature set. This router assumes control
of call processing if all other
Cisco Unified Communications Manager servers
become unreachable. The SRST
Cisco Unified Communications Manager always
appears last in the list of servers, even if it is active.
You configure the SRST router address in the Device
Pool section in Cisco Unified Communications
Manager Configuration window.

Network Configuration

8-7