Setting Up Services; Adding Users To Cisco Unified Communications Manager - Cisco 7970G - IP Phone VoIP Administration Manual

Chapter 5 Configuring Features, Templates, Services, and Users

Setting Up Services

Adding Users to Cisco Unified Communications
Manager
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
The Services button on the Cisco Unified IP Phone gives users access to
Cisco Unified IP Phone Services. You can also assign services to the
programmable buttons on the phone (refer to Cisco Unified IP Phone 7970 Series
Guide for more information). These services comprise XML applications that
enable the display of interactive content with text and graphics on the phone.
Examples of services include local movie times, stock quotes, and weather
reports.
Before a user can access any service:
You must use Cisco Unified Communications Manager Administration to
•
configure available services.
The user must subscribe to services by using the Cisco Unified IP Phone User
•
Options application. This web-based application provides a graphical user
interface (GUI) for limited, end-user configuration of IP Phone applications.
Before you set up services, gather the URLs for the sites that you want to set up
and verify that users can access those sites from your corporate IP telephony
network.
To set up these services, choose Device > Device Settings > Phone Services from
Cisco Unified Communications Manager Administration. Refer to Cisco
Unified Communications Manager Administration Guide and to Cisco Unified
Communications Manager System Guide for more information.
After you configure these services, verify that your users have access to the
Cisco Unified Communications Manager IP Phone Options web-based
application, from which they can select and subscribe to configured services. See
the "How Users Subscribe to Services and Configure Phone Features" section on
page A-4 for a summary of the information that you must provide to end users.
Adding users to Cisco Unified Communications Manager allows you to display
and maintain information about users and allows each user to perform these tasks:
Setting Up Services
5-27