Cisco 7970G - IP Phone VoIP Administration Manual page 120

Device Configuration Menu
Table 4-11 UI Configuration Menu Options (continued)
Option
Auto Call Select
"more" Softkey
Timer
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
4-28
Description
Indicates whether the phone
automatically shifts the call focus to an
incoming call on the same line when
the user is already on a call.
When this option is enabled, the phone
shifts the call focus to the most recent
incoming call.
When this option is disabled, all
automatic focus changes, including
Auto Line Select, are disabled
regardless of their setting.
Default: Enabled
Indicates the number of seconds that
additional softkeys are displayed after
the user presses more. If this timer
expires before the user presses another
softkey, the display reverts to the initial
softkeys.
Range: 5 to 30; 0 represents an infinite
timer.
Default: 5
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
OL-14626-01