Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Editing Values
Note
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
When you edit the value of an option setting, follow these guidelines:
Use the keys on the keypad to enter numbers and letters.
•
To enter letters by using the keypad, use a corresponding number key. Press
•
the key one or more times to display a particular letter. For example, press the
2 key once for "a," twice quickly for "b," and three times quickly for "c."
After you pause, the cursor automatically advances to allow you to enter the
next letter.
•
To enter a period (for example, in an IP address), press the . (period) softkey
or press * on the keypad.
•
Press the << softkey if you make a mistake. This softkey deletes the character
to the left of the cursor.
Press the Cancel softkey before pressing the Save softkey to discard any
•
changes that you have made.
The Cisco Unified IP Phone provides several methods you can use to reset or
restore option settings, if necessary. For more information, see the
Restoring the Cisco Unified IP Phone" section on page
Related Topics
•
Displaying a Configuration Menu, page 4-3
Unlocking and Locking Options, page 4-4
•
Overview of Options Configurable from a Phone, page 4-6
•
Network Configuration Menu, page 4-7
•
Device Configuration Menu, page 4-16
•
Security Configuration Menu, page 4-46
•
Configuration Menus on the Cisco Unified IP Phone 7970 Series
"Resetting or
9-19.
4-5