Adding Phones With Cisco Unified Communications Manager Administration; Adding Phones With Bat; Adding Phones With Auto-Registration And Taps - Cisco 7965G Administration Manual

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
When you configure the cluster for mixed mode through the Cisco CTL client, auto-registration is
Note
automatically disabled. When you configure the cluster for non-secure mode through the Cisco CTL
client, auto-registration is automatically enabled.
Refer to Cisco Unified Communications Manager Bulk Administration Guide for detailed instructions
about BAT and about TAPS.
Related Topics
•
•
•

Adding Phones with Cisco Unified Communications Manager Administration

You can add phones individually to the Cisco Unified Communications Manager database using
Cisco Unified Communications Manager Administration. To do so, you first need to obtain the MAC
address for each phone.
For information about determining a MAC address, see the
Unified IP Phone" section on page
After you have collected MAC addresses, in Cisco Unified Communications Manager Administration,
choose Device > Phone and click Add New to begin.
For complete instructions and conceptual information about Cisco Unified Communications Manager,
refer to Cisco Unified Communications Manager Administration Guide and to Cisco Unified
Communications Manager System Guide.
Related Topics
•
•
•

Adding Phones with BAT

The Cisco Bulk Administration Tool (BAT) enables you to perform batch operations, including
registration, on multiple phones.
To add phones using BAT only (not in conjunction with TAPS), you first need to obtain the appropriate
MAC address for each phone.
For information about determining a MAC address, see the
Unified IP Phone" section on page
For detailed instructions about using BAT, refer to Cisco Unified Communications Manager
Administration Guide and to Cisco Unified Communications Manager Bulk Administration Guide.
Related Topics
•
OL-12650-01
Adding Phones with Auto-Registration, page 2-9
Adding Phones with Cisco Unified Communications Manager Administration, page 2-11
Adding Phones with BAT, page 2-11
Adding Phones with Auto-Registration, page 2-9
Adding Phones with Auto-Registration and TAPS, page 2-10
Adding Phones with BAT, page 2-11
Adding Phones with Auto-Registration, page 2-9
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
Adding Phones to the Cisco Unified Communications Manager Database
"Determining the MAC Address of a Cisco
2-13.
"Determining the MAC Address of a Cisco
2-13.
2-11