Adding Phones With Cisco Unified Cm Administration; Adding Phones With Bat; Adding Phones With Auto-Registration And Taps - Cisco 6921 Administration Manual

Adding Phones to the Cisco Unified CM Database
Related Topics
•
•
•

Adding Phones with Cisco Unified CM Administration

You can add phones individually to the Cisco Unified CM database by using Cisco Unified CM
Administration. To do so, you first need to obtain the MAC address for each phone.
For information about determining a MAC address, see the
Unified IP Phone" section on page
After you have collected MAC addresses, in Cisco Unified CM Administration, choose Device > Phone
and click Add New to begin.
For complete instructions and conceptual information about Cisco Unified CM, go to the
Communications Manager
Guide.
Related Topics
•
•
•

Adding Phones with BAT

Cisco Unified Communications Manager Bulk Administration Tool (BAT) enables you to perform batch
operations, including registration, on multiple phones. To access BAT, choose Bulk Administration
drop-down menu in Cisco Unified Communications Manager Administration,
To add phones by using BAT only (not in conjunction with TAPS), you can use the MAC address for
each phone or dummy MAC addresses if you have a large number of new phones.
For information about determining a MAC address, see the
Unified IP Phone" section on page
For detailed instructions about using BAT, go to the
Communications Manager Administration Guide.
Related Topics
•
•
•
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP)
2-10
Adding Phones with Auto-Registration, page 2-8
Adding Phones with Cisco Unified CM Administration, page 2-10
Adding Phones with BAT, page 2-10
Overview" chapter in the Cisco Unified Communications Manager System
Adding Phones with Auto-Registration, page 2-8
Adding Phones with Auto-Registration and TAPS, page 2-9
Adding Phones with BAT, page 2-10
Adding Phones with Auto-Registration, page 2-8
Adding Phones with Auto-Registration and TAPS, page 2-9
Adding Phones with Cisco Unified CM Administration, page 2-10
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
"Determining the MAC Address for a Cisco
2-11.
"Determining the MAC Address for a Cisco
2-11.
"Bulk Administration"
"Cisco Unified
chapter in the Cisco Unified
OL-20851-01