Applying Changes To Wireless Settings And Network Profiles - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Chapter 5 Configuring Network Profiles on the Cisco Wireless IP Phone 7920
Activating a WEP Key
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Applying Changes to Wireless Settings and Network Profiles

Step 1
Step 2
Step 3
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
After you configure the WEP Key, you must activate it. Follow these steps to
activate the key.
Procedure
Choose Menu > Profiles > Network Profile.
Scroll to and select the profile that you want to change.
Scroll to and select 802.11b Configuration > Encryption.
The WEP Key options display.
Scroll to the WEP Key that you want to activate, and press Select.
Scroll to Activate and press OK to activate the key.
A check mark appears next to the activated key.
Press Back to return to the Wireless Setting options.
Related Topics
• Applying Changes to Wireless Settings and Network Profiles
Setting Up the Service Set Identifier (SSID)
•
Selecting the Authentication Type
•
Whenever you make changes to the settings in a network profile, you must apply
the changes to the network profile. Use the following steps to activate the changes.
Procedure
Choose Menu > Profiles > Network Profile.
Scroll to and select the profile that you changed.
Select Apply Change.
Configuring Wireless Settings for the Profile
5-21