Features Supported on the Cisco Wireless IP Phone 7920
Configuring Telephony Features
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
1-4
Call-handling features such as forward, transfer, hold, call park, conference,
•
call pickup, and group pickup
Configurable softkey for access to your personal phone book or IP phone
•
service
Choice of four network profiles
•
•
Choice of personal profiles for different environments, such as outdoors, or
meetings
Access to web-based services such as weather, stock reports, and phone
•
directories
Like other network devices, you must configure the Cisco Wireless IP Phones to
prepare them to access Cisco CallManager and the rest of the IP network. See the
"Configuring Network Features for the Cisco Wireless IP Phone" section on
page 1-5
for more information about configuration options. Because the
Cisco IP Phone is a network device, you can obtain detailed status information
about it. This information can assist you in troubleshooting problems that users
might encounter when using their IP phones. See
Statistics, and Firmware Information on the Cisco Wireless IP Phone 7920,"
tips on using this information.
Related Topics
Configuring Network Profile Settings, page 5-3
•
Configuring Features, Templates, Services, and Users, page 7-1
•
You can use the Cisco CallManager Administration application to set up phone
registration criteria and calling search spaces, and to modify softkey templates,
among other tasks. For more information, see
Templates, Services, and Users."
In some places, this manual provides partial instructions for procedures that
involve Cisco CallManager Administration. These instructions are intended to
point you to the appropriate page in the Cisco CallManager application and to
provide some initial guidance.
Chapter 1
An Overview of the Cisco Wireless IP Phone 7920
Chapter 8, "Viewing Status,
Chapter 7, "Configuring Features,
for
OL-7104-01