Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual page 78

Installing the Cisco Wireless IP Phone 7920
Press the battery to the body of the phone until it locks into place.
Step 2
To remove the battery, press down on the locking catch, then lift and remove the
Step 3
battery.
Figure 3-1
1
2
3
Note The media access control (MAC) address for each Cisco Wireless IP Phone 7920
appears on a printed label on the back of the phone underneath the battery.
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
3-18
Cisco Wireless IP Phone 7920 Battery Installation
1
Locking catch—Press to release the battery
Battery catches—Insert these into the slots near the bottom of the phone
at battery installation.
Metal contacts—Match the contacts on the battery to the contacts on the
phone.
Chapter 3
3 2
2
Setting Up Cisco Wireless IP Phones
OL-7104-01