Configuring The Phone Book; Configuring Speed-Dial Hot Keys - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Overview of the Application Windows
Step 1
Step 2
Note
Resetting the Phone Lock Password for a Locked Phone
Caution
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
4-32
To reset the password, follow these steps:
Procedure
Click the Phone Lock Password tab.
Check the Reset Password to Default check box.
You must inform the user that the default password is "12345 " to unlock the
phone.
When a user has locked the phone and forgets their password, you can disable the
Phone Lock feature and password only when the phone is powered on and
associated with an access point. If you cannot unlock the phone by using the
default password (12345), then you must call the Cisco Technical Assistance
Center (TAC) to have the phone reset to factory defaults.
Be aware that resetting the phone to factory defaults removes all phone
configuration, including Speed Dial, Call History, and Profile settings. The
network configuration is reset to default settings so that the phone cannot reach
the access point and telephony network.
Related Topics
Configuring a Network Profile, page 4-18
•
Configuring Phone Settings, page 4-25
•
Configuring User Profiles, page 4-29
•
Configuring the Phone Book, page 4-33
•
Configuring Speed-Dial Hot Keys, page 4-34
•
Chapter 4 Using the Cisco 7920 Configuration Utility
OL-7104-01