Preparing To Install The Cisco Wireless Ip Phone 7920 - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Preparing to Install the Cisco Wireless
IP Phone 7920
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
Setting Up Cisco Wireless IP Phones
This chapter describes how to install and configure the Cisco Wireless
IP Phone 7920 on an IP telephony network:
Preparing to Install the Cisco Wireless IP Phone 7920, page 3-1
•
Configuring IP Phones in Cisco CallManager, page 3-6
•
Installing the Cisco Wireless IP Phone 7920, page 3-13
•
Before You Begin
Before you install Cisco Wireless IP Phone 7920s, you must determine how you
want to configure the phones in your wireless network. Then, you can install the
phone and verify its functionality. For more information, see
Overview of the Wireless Network."
The following sections provide network requirements and configuration tasks:
Preparing to Install the Cisco Wireless IP Phone 7920, page 3-1
•
• Configuring IP Phones in Cisco CallManager, page 3-6
To install and configure the Cisco Wireless IP Phone, you must configure network
settings, set up Cisco CallManager, and make changes locally on the phone.
Review the following requirements and task list to prepare for the installation.
C H A P T E R
3
Chapter 2, "An
3-1