Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual page 113

Chapter 4 Using the Cisco 7920 Configuration Utility
Setting CDP Parameters
Cisco Discovery Protocol (CDP) is a device-discovery protocol that runs on all
Cisco network equipment. Each device sends identifying messages to a broadcast
address, and each device monitors the messages sent by other devices.
If you use CDP in your network, use the following steps to configure CDP
parameters for the phone.
Note
Procedure
In the Advanced Settings area, check the Cisco Discovery Protocol check box to
Step 1
activate the CDP parameters.
In the CDP Time To Live field, enter the time in seconds (0 to 255) that CDP
Step 2
packets should stay in a phone buffer before they are discarded. (default is 180)
Step 3 In the CDP Transmit Interval field, enter the interval time (from 0 to 65535
seconds) between sending CDP packets from the Cisco Wireless IP Phone
7920.(default is 60)
Choosing Softkey Settings
Under Softkey Settings, you can set which softkey displays when the phone is
idle: PhBook or Services (Svcs represents Services on the phone)
Use the Call Up option to determine which softkeys display when the phone is
connected to a call. You can have Mute display or you can assign a customized
softkey template and order the keys as you like. Because the Cisco Wireless
IP Phone has only two softkeys, you must choose whether to display the Mute
softkey before the Cisco CallManager softkeys or after the softkeys as listed in the
softkey template.
You can also choose these settings when configuring the phones in Cisco
CallManager Administration. In the Phone Configuration page, you can use the
Product Specific Configuration Options. The settings in the Cisco CallManager
configuration file override the settings from the Configuration Utility. For more
information, see the
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
If you use non-Cisco equipment, you can disable the CDP parameters.
"Configuring Softkey Templates" section on page
Overview of the Application Windows
7-8.
4-27