Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual page 169

Chapter 7 Configuring Features, Templates, Services, and Users
•
To set up IP Phone services, follow these steps:
Procedure
Before you set up services, gather the URLs for the sites you want to set up and
Step 1
verify that users can access those sites from your corporate IP telephony network.
To set up these services, choose Feature > Cisco IP Phone Services from
Step 2
Cisco CallManager Administration. Refer to Cisco CallManager Administration
Guide and Cisco CallManager System Guide for more information.
After you configure these services, verify that your users have access to the
Step 3
Cisco CallManager IP Phone Options web-based application, from which they
can select and subscribe to configured services. See the
Phone Features and Services" section on page A-3
information that you must provide to end users.
Note To configure extension mobility services for users, refer to Cisco CallManager
Features and Services Guide.
Related Topics
•
•
•
•
•
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
The user must subscribe to services using the Cisco IP Phone User Options
application. This web-based application provides a graphical user interface
(GUI) for limited, end-user configuration of IP Phone applications.
Configuring Cisco Wireless IP Phones in Cisco CallManager, page 7-2
Configuring Softkey Templates, page 7-8
Configuring Corporate and Personal Directories, page 7-12
Adding Users to Cisco CallManager, page 7-13
Creating Custom Phone Rings, page 7-14
Setting Up IP Phone Services
"How Users Configure
for a summary of the
7-11