Configuring Wireless Settings In A Network Profile - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

Configuring Network Profiles
Table 4-4
802.11A Power Settings
Channel
Status
Max Tx Power
If you uncheck all channels in the 802.11g Power Settings window or 802.11a Power Settings window,
Note
the phone will not be able to access the WLAN.
Related Topics
•
•
•
•

Configuring Wireless Settings in a Network Profile

You must configure wireless settings in a profile to enable the phone to access the wireless network. To
configure the wireless settings, refer to
Procedure
Choose the network profile that you want to configure.
Step 1
To give the profile a recognizable name, in the Profile Name field, enter a name up to 63 characters and
Step 2
numbers in length.
To identify the SSID that the phone uses to associate with access points, in the SSID field, enter an SSID
Step 3
that is already configured in the WLAN.
Note
To conserve battery power, in the Call Power Save Mode, choose the type (U-APSD or PS-Poll) and
Step 4
option that is being used in the WLAN.
Choose the signal mode or priority of signal modes in the 802.11 Mode field that is used by your WLAN,
Step 5
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
4-12
Advanced Network Profile Settings (continued)
Assigns the channels
Enabled—Identifies enabled channels in WLAN
to improve scanning for the phone
Sets the maximum transmit power for the phone
Accessing the Phone Web Page, page 4-3
Configuring Wireless LAN Security, page 4-13
Setting the Wireless Security Credentials, page 4-15
Setting Wireless Encryption, page 4-16
The SSID is case sensitive; you must enter it exactly as configured in the network.
Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages
Table 4-3 and follow these steps.
Configuring Advanced
Network Profile
Settings, page 4-25
OL-15984-01