Overview of the Application Windows
Step 4
Step 5
Using the Phone Profile Window
Configuring a Network Profile
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
4-18
Ensure that you have enabled the USB port on the phone. See the
USB Port on the Phone" section on page
Wait for a few moments for the interface to activate and click OK. The green
Online status indicator displays.
Related Topics
Using the Phone Profile Window, page 4-18
•
Using the Configuration Wizard, page 4-14
•
The Phone Profile window tabs provide access to configuration windows that
allow you to perform the following tasks:
Configuring a Network Profile, page 4-18
•
Configuring Phone Settings, page 4-25
•
Configuring User Profiles, page 4-29
•
Configuring the Phone Book, page 4-33
•
Setting the Phone Lock Password, page 4-31
•
Configuring Speed-Dial Hot Keys, page 4-34
•
The Network Profile tab page allows you to configure up to four network profiles
for a phone. You can give each profile a name and enter settings for a specific
SSID. For example, configure Profile 1 for the most frequently accessed SSID and
WLAN location. You can configure other profiles for access to WLANs in other
locations or offices in your network.
A network profile contains the following types of parameters and settings:
System Parameters
•
RF Network Settings
•
Network Security Settings
•
Chapter 4
Using the Cisco 7920 Configuration Utility
4-5.
"Activating the
OL-7104-01