Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual page 173

Chapter 7 Configuring Features, Templates, Services, and Users
Extract the ring tone files to your hard disk.
Step 2
To stop the TFTP service, from Cisco CallManager Administration, choose
Step 3
Applications > Serviceability> Tools > Control Center. Right-click Cisco
TFTP and click Stop .
Back up your current ring list file (ringlist.xml) because the new ring list file
Step 4
might not include all of your ring tones.
Upgrade the Cisco Wireless IP Phone 7920 to the latest version firmware image
Step 5
file.
Copy the special loud ring tone files (loudxxx.raw) and the associated ringlist.xml
Step 6
file into the C:\program files\Cisco\TFTPPath directory on the
Cisco CallManager server.
Note
To restart the Cisco TFTP server, choose Applications > Serviceability> Tools >
Step 7
Control Center. Right-click Cisco TFTP and click Restart
To download and select a loud ring tone as the current ring tone, power on the
Step 8
Cisco Wireless IP Phone 7920.
Choose Menu > Phone Settings > Ring Tones > Download Ring Tone. The loud
Step 9
ring tones (loudxxx.raw) should be available for download on the phone.
From the Download Ring Tone list, scroll to and select the desired loud ring tone.
Step 10
A check mark appears by the active ring tone.
Step 11 From the Cisco Wireless IP Phone 7920, choose Menu > Profiles to adjust the
ring volume.
Note
For additional information about setting the ring volume on the phone, refer to
Chapter 7, "Using and Changing Profiles," in the Cisco Wireless IP Phone 7920
Guide.
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
You must copy the ring tone files, not move them. If the ring tone files are
moved, they will not inherit the correct permissions.
Make sure the ring volume is tuned to the maximum setting. Alternatively,
you can choose the "Outdoors" profile, which has the maximum volume
setting preset.
Creating Custom Phone Rings
7-15