Viewing The Current Configuration; Viewing The Media Access Control Address - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Chapter 6 Verifying the Wireless Network Configuration on the Cisco Wireless IP Phone

Viewing the Current Configuration

Step 1
Step 2
Step 3

Viewing the Media Access Control Address

Step 1
Step 2
Step 3
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
To view the current network settings for a Cisco Wireless IP Phone 7920, follow
these steps:
Procedure
Choose Menu > Network Config > Current Config.
Press Select to view the list of network settings.
See Table 6-1 for descriptions and references for these settings.
To return to the Network Config screen, press Back.
Related Topics
Verifying the Current Configuration Settings, page 6-3
•
Modifying DHCP Settings, page 5-4
•
• Configuring Static Settings, page 5-6
Performing a Site Survey Verification, page 6-7
•
Every phone has a unique Media Access Control (MAC) address that is assigned
to the device when it is manufactured. The MAC address appears on the back of
the phone under the battery or you can use the menu to view it.
Procedure
Choose Menu > Network Config > MAC Address.
Press Select to view the MAC address for the phone.
Press Back to return to the Static Settings options.
Verifying the Current Configuration Settings
6-5