Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual page 159

Configuring Features, Templates,
Services, and Users
After you install and configure your wireless voice network, you can add
Cisco Wireless IP Phone 7920s by using the Cisco CallManager Administration
application to configure telephony features, optionally modify softkey templates,
set up services, and assign users.
This chapter provides an overview of these configuration and setup procedures.
Cisco CallManager documentation provides detailed instructions for these
procedures.
For suggestions about how to provide users with information about features, and
what information to provide, see
By Using a Website."
For information about setting up phones in non-English environments, see
Appendix B, "Supporting International Users."
This chapter includes following topics:
•
•
•
•
•
•
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
Configuring Cisco Wireless IP Phones in Cisco CallManager, page 7-2
Configuring Softkey Templates, page 7-8
Setting Up IP Phone Services, page 7-10
Configuring Corporate and Personal Directories, page 7-12
Adding Users to Cisco CallManager, page 7-13
Creating Custom Phone Rings, page 7-14
C H A P T E R
Appendix A, "Providing Information to Users
7
7-1