Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual page 131

Chapter 5 Configuring Network Profiles on the Cisco Wireless IP Phone 7920
The Static Settings menu options display.
Scroll to the desired entry and press Select.
Step 4
See
Press the Edit softkey to enter or modify the entry.
Step 5
Note
For information about entering values, see the
Settings" section on page
Press Back to return to the Static Settings options.
Step 6
Table 5-2
Static Setting
IP Address
Subnet Mask
Primary Gateway
Primary TFTP server
Primary DNS server
Secondary DNS server
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
Table 5-2 for descriptions of the static setting fields.
Use the arrow to enter a space between octets in the IP address.
5-3.
Static Settings When DHCP is Disabled
"Configuring Network Profile
Description
IP address, the unique identifier assigned by the
system administrator for the phone.
Used to partition the IP address into a network
identifier and host identifier so TCP/IP can
distinguish between them.
Identifies the gateway that provides connectivity to
the IP network beyond the subnet to which the phone
belongs.
Identifies the TFTP server that the phone uses to
obtain configuration files.
If the system is configured to use host names for
servers instead of IP addresses, identify the primary
and secondary DNS server to resolve host names.
Configuring Network Profile Settings
5-7