Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual page 150

Verifying the Current Configuration Settings
Table 6-1 Current Configuration Settings (continued)
Network Setting
CallManager 1-5
Note
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
6-4
Chapter 6 Verifying the Wireless Network Configuration on the Cisco Wireless IP Phone
Description
Cisco CallManager servers that are
available for processing calls from this
phone, in prioritized order. For an
available server, an option will show the
Cisco CallManager server IP address and
one of the following states:
Active—Cisco CallManager server
•
from which the phone is currently
receiving call-processing services.
• Standby—Cisco CallManager server
to which the phone switches if the
current server goes down.
None—No TCP connection to this
•
Cisco CallManager server.
SRST—Survivable Remote Site
•
Telephony router that assumes control
of call processing if all other
Cisco CallManager servers are
unreachable.
The SRST Cisco CallManager always appears last in the list of servers, even if it
is active.
Related Topics
Viewing the Current Configuration, page 6-5
•
Modifying DHCP Settings, page 5-4
•
Configuring Static Settings, page 5-6
•
Configuring TFTP Option, page 5-9
•
Usage Notes
Use Cisco CallManager
Administration to modify.
Configure the SRST router
address in the Device Pool
section in Cisco CallManager
Administration.
OL-7104-01