Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual page 162

Configuring Cisco Wireless IP Phones in Cisco CallManager
Table 7-1 Configuring Telephony Features Using Cisco CallManager Administration
Feature Description
Abbreviated Allows users to speed dial a phone number by
Dialing entering an assigned index code (1-99) on the
phone keypad.
Users assign index codes from the User Options
web pages.
Auto Answer Connects incoming calls automatically after a
ring or two. This feature only works for the
speaker, not the headset option.
Barge Adds users to an active call on a shared line. Set
the built-in bridge service parameter to make this
system-wide feature available or enable the
built-in bridge for individual phones.
Note
Call Back Provides users with an audio and visual alert on
the phone when a busy or unavailable party
becomes available.
Call Forward Allows users to redirect incoming calls to another
number.
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
7-4
Cisco Wireless IP Phone 7920 users can
use the Barge feature only with calls that
are initiated from a shared line on a
desktop phone with the built-in bridge
enabled. Cisco IP Phone users cannot
barge into a call that is initiated from a
Cisco Wireless IP Phone 7920 with the
shared line.
Chapter 7 Configuring Features, Templates, Services, and Users
Reference
• Refer to Cisco IP Phone
Features A to Z
Refer to Cisco IP Phone
•
Features A to Z
Refer to Cisco CallManager
•
Administration Guide.
Refer to Cisco CallManager
•
Administration Guide.
Refer to Cisco CallManager
•
Features and Services Guide.
Refer to Cisco CallManager
•
Features and Services Guide.
Refer to Cisco CallManager
•
Administration Guide.
Refer to Cisco IP Phone
•
Features A to Z
Refer to Cisco CallManager
•
Administration Guide.
OL-7104-01