Using The Cisco Wireless Ip Phone 7920 Site Survey Utility - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Chapter 6 Verifying the Wireless Network Configuration on the Cisco Wireless IP Phone

Using the Cisco Wireless IP Phone 7920 Site Survey Utility

Step 1
Step 2
Step 3
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
Related Topics
Using the Cisco Wireless IP Phone 7920 Site Survey Utility, page 6-9
•
Requirements for an Optimal Wireless Voice Environment, page 6-10
•
Cisco Wireless IP Phone 7920 Design and Deployment Guide
•
The Cisco Wireless IP Phone 7920 includes a site survey utility within the
Network Config menu that provides information about the access points currently
within in range of the phone.
To use the site survey utility, follow these steps:
Procedure
Configure the Cisco Wireless IP Phone 7920 with the same SSID and
encryption/authentication settings as the APs.
Power on the phone so that it associates with the WLAN.
Choose Menu > Network Config > Site Survey.
The phone displays a list of access points within range that have the same SSID
and security settings as the phone. See the following sample site survey list.
1(A),abcd...39,0
6(C),abcd...51,0*
11(A),abcd...32,0
The display provides the following information about the APs:
AP
Channel Channel State
1 Active (A)
6 Connected (C)
11 Active (A)
Performing a Site Survey Verification
SSID RSSI
abcd1234 39
abcd1234 51
abcd1234 32
Channel Connect
Utilization AP
0
0 *
0
6-9