Verifying the Current Configuration Settings
Verifying Wireless Settings
Step 1
Step 2
Step 3
Table 6-2
802.11b Configuration Network Settings
Network Setting
Associated AP MAC
Associated AP SSID
Network Type
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
6-6
Chapter 6
Verifying the Wireless Network Configuration on the Cisco Wireless IP Phone
To configure the wireless network settings in the 802.11b menu, refer to the
"Configuring Wireless Settings for the Profile" section on page 5-10
Related Topics
Viewing the Current Configuration, page 6-5
•
The 802.11b submenu displays settings that the phone is using to authenticate
with an access point. These settings include the SSIDs, authentication and
encryption data.
On Cisco Wireless IP Phone 7920, you can view information about the current
wireless network settings of the phone to troubleshoot problems.
To view the wireless settings, follow these steps:
Procedure
Choose Menu > Network Config > 802.11b Configuration.
Scroll to the desired 802.11b Configuration setting and press Select.
See
Table 6-2
for the description of the setting.
Press Back to return to the 802.11b Configuration menu options.
Description
MAC address for the access point to
which the phone is currently associated.
SSID for the access point to which the
phone is currently associated.
Only Infrastructure Mode is used in the
network.
References
Received from the access point
Received from the access point
OL-7104-01