Setting The Cisco Light Extensible Authentication Protocol (Leap) - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Configuring Wireless Settings for the Profile
Step 1
Step 2
Step 3
Step 4
Step 5
Note

Setting the Cisco Light Extensible Authentication Protocol (LEAP)

Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
5-16
Chapter 5
To select the authentication type for the profile, follow these steps:
Procedure
Choose Menu > Profiles > Network Profile.
Scroll to and select the profile that you want to change.
Scroll to and select 802.11b Configuration.
Scroll to Authentication and press Select.
The Authentication options display.
Scroll to one of these options and press Select.
• AKM
Open
•
Shared Key
•
LEAP
•
A check appears by the selected authentication type.
You need to enable WEP Key encryption before you choose the Shared Key
authentication type. Otherwise, an "Enable WEP Key first!" message appears.
Related Topics
Setting Up the Wired Equivalent Privacy (WEP) Keys
•
• Setting Up the Service Set Identifier (SSID)
Applying Changes to Wireless Settings and Network Profiles
•
When your network uses Cisco LEAP or AKM for user authentication, you must
configure both the user name and a password on the Access Control Server (ACS)
and the phone.
Configuring Network Profiles on the Cisco Wireless IP Phone 7920
OL-7104-01