Creating Custom Phone Rings; Downloading Loud Ring Tones - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Creating Custom Phone Rings

Creating Custom Phone Rings

Downloading Loud Ring Tones

Step 1
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
7-14
Refer to Bulk Administration Tool User Guide for details.
Related Topics
Configuring Cisco Wireless IP Phones in Cisco CallManager, page 7-2
•
Configuring Softkey Templates, page 7-8
•
Setting Up IP Phone Services, page 7-10
•
Configuring Corporate and Personal Directories, page 7-12
•
Creating Custom Phone Rings, page 7-14
•
You can customize the phone ring types available at your site by using a set of
phone ring sounds that are provided by Cisco CallManager or by creating your
own pulse code modulation (PCM) files and editing the RingList.xml file. Refer
to Cisco CallManager Features and Services Guide for more information about
customized ring tones.
For wireless phone users in noisy environments, you can download a set of loud
ring tones. For information about how to download these ring tones, see the
"Downloading Loud Ring Tones" section on page
The Cisco Wireless IP Phone 7920 running on Cisco CallManager Release 3.3(3)
SR 1 or later provides support for special loud ring tones. The loud ring tones play
at 136 dBA after being initially played at 125 dBA for 2 seconds; these are
intended for use in noisy customer environments that require loud ring tones.
To load the loud ring tones on the Cisco Wireless IP Phone 7920, follow these
steps:
Procedure
Download the loud ring tones zip file and Readme file from CCO at this URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser-crypto.
Chapter 7 Configuring Features, Templates, Services, and Users
7-14.
OL-7104-01