Adding Phones With Auto-Registration And Taps - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Chapter 3 Setting Up Cisco Wireless IP Phones
Step 5
Step 6

Adding Phones with Auto-Registration and TAPS

Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
Scroll down on the page to Clusterwide parameters (Parameters that apply to all
servers), and set the Enable Caching of Configuration Files parameter to False.
Click the Update button.
Related Topics
Adding Phones with Auto-Registration and TAPS, page 3-9
•
Adding Phones with Cisco CallManager Administration, page 3-11
•
Adding Phones with BAT, page 3-10
•
You can add a group of phones quickly by using auto-registration and TAPS. First,
use the Bulk Administration Tool (BAT) to add phones to the Cisco CallManager
database with dummy MAC addresses. Then use TAPS to update MAC addresses
and download pre-defined configurations for the phones.
To implement TAPS, you or the end-users dial a TAPS directory number and
follow voice prompts. When the process is complete, the phone has downloaded
its directory number and other settings. The correct MAC address for the phone
is updated in Cisco CallManager Administration.
You must make sure that auto-registration is enabled in Cisco CallManager
Administration for TAPS to function.
Refer to Bulk Administration Tool User Guide for Cisco CallManager for detailed
instructions about BAT and about TAPS.
Related Topics
Adding Phones with Auto-Registration, page 3-8
•
Adding Phones with Cisco CallManager Administration, page 3-11
•
Adding Phones with BAT, page 3-10
•
Configuring IP Phones in Cisco CallManager
3-9