Connecting Your Phone To The Computer Network; Connecting Your Phone To The Wired Network; Connecting Your Phone To The Wireless Network - Cisco Small Business Pro User Manual

Hide thumbs Also See for Small Business Pro:

Table of Contents

Installing Your Phone

Connecting Your Phone to the Computer Network

STEP 1

STEP 2

NOTE

Cisco Small Business Pro SPA IP Phone 525G (SIP) User Guide

You connect your phone to the local network by using an Ethernet cable:

Plug the Ethernet cable into the back of the base station into the slot marked "SW."

This port is labeled #4 on

Plug the other end of the Ethernet cable into the appropriate device on your

network, such as a network switch.

The PC port is not supported in wireless operation. The PC port is only supported

in a wired operation.

Figure 1 on page

26.

NOTE: The SPA525G provides a second

Ethernet port. You can connect a PC to this port

to provide network access to the PC. This port

is labeled #3 in the

Cisco SPA525G IP Phone

Connections

graphic.

when the phone is connected to the network

via the built-in Wireless-G client.

This port cannot be used

Table of Contents

Spa525g